Ref. UDC300T800BD
The T800SC 24K woven UD carbon fabric concentrates 300 g/m² of carbon in the main reinforcement direction. Its E-glass weft with polyamide covering stabilizes the fabric, resulting in a total weight of 320 g/m².
Available in widths of 100 and 300 mm, it is used with epoxy resin to manufacture lightweight, strong structural composite parts.
The T800 woven UD carbon fabric is designed for manufacturing and reinforcing composite parts requiring mechanical strength, stiffness and lightweight performance. Its TORAYCA T800SC fibres are oriented in one main direction to withstand loads along the reinforcement axis.
A transverse E-glass weft with polyamide covering holds the carbon tows in place and stabilizes the fabric during handling.
T800SC is an intermediate-modulus carbon fibre. The 24K designation refers to a tow containing 24,000 filaments.
Tensile strength: 5,880 MPa
Tensile modulus: 294 GPa
Elongation at break: 2%
Density: 1.80 g/cm³
Typical values for the fibre alone. Laminate performance depends on the resin system, fibre orientation, fibre content and manufacturing quality.
Suitable for reinforcing beams, spars, profiles, panels and structural marine components, as well as manufacturing sports equipment and technical parts for the automotive, aerospace and industrial sectors, depending on project requirements.
For hand lay-up with a suitable epoxy resin, align the fibres according to the laminate design and ensure uniform impregnation. Carefully remove trapped air, control the resin quantity and follow the mixing ratio and curing cycle specified for the selected resin system.
Data sheet
The T800 woven UD carbon fabric is designed for manufacturing and reinforcing composite parts requiring mechanical strength, stiffness and lightweight performance. Its TORAYCA T800SC fibres are oriented in one main direction to withstand loads along the reinforcement axis.
A transverse E-glass weft with polyamide covering holds the carbon tows in place and stabilizes the fabric during handling.
T800SC is an intermediate-modulus carbon fibre. The 24K designation refers to a tow containing 24,000 filaments.
Tensile strength: 5,880 MPa
Tensile modulus: 294 GPa
Elongation at break: 2%
Density: 1.80 g/cm³
Typical values for the fibre alone. Laminate performance depends on the resin system, fibre orientation, fibre content and manufacturing quality.
Suitable for reinforcing beams, spars, profiles, panels and structural marine components, as well as manufacturing sports equipment and technical parts for the automotive, aerospace and industrial sectors, depending on project requirements.
For hand lay-up with a suitable epoxy resin, align the fibres according to the laminate design and ensure uniform impregnation. Carefully remove trapped air, control the resin quantity and follow the mixing ratio and curing cycle specified for the selected resin system.
Data sheet
Derniers avis concernant ce produit