Epoxy Resin - Page2

A bio-based product is a product made entirely or partially from renewable resources (biomass), as opposed to petroleum-based products derived from fossil materials (oil). Our bio-based products are formulated with no compromise in performance compared to their petroleum-based equivalents.

Mix the resin for about 2–3 minutes. The mixing should be done slowly, scraping the sides and the bottom of the cup. It is recommended to mix using a figure-eight motion. This step is very important. If it is not done correctly:

• The mixture will not be homogeneous

• There is a risk of optical defects

• There is a risk of surface defects (sticky areas, waves, etc.)

Warning: if your resin and hardener have a very large difference in viscosity, you must mix very slowly to limit the risk of splashing.

To achieve proper lamination with a fabric (glass, carbon, flax, aramid), it is important to follow the correct application sequence in order to ensure good fibre impregnation and avoid the formation of air bubbles.

The first step is to apply a thin layer of resin directly onto the substrate (wood, foam, metal, composite, etc.). This layer prepares the surface and improves the adhesion of the fabric.

Next, place the dry fabric onto this first layer of resin. The resin already present on the substrate helps hold the fabric in place and facilitates its impregnation.

Once the fabric is properly positioned, apply another layer of resin on top using a brush, roller, or spatula. The goal is to fully impregnate the fibres until the fabric becomes translucent (in the case of glass or flax) or uniformly saturated.

After applying the resin, it is recommended to perform air removal using a laminating roller (bubble roller). This step helps remove trapped air within the fibres and ensures a uniform and strong laminate.

If multiple layers of fabric are required, simply repeat the same process:
resin → fabric → resin → air removal.

Following this sequence ensures optimal fibre impregnation, good bonding between layers, and maximum mechanical performance of the final composite.

Yes, all epoxy systems can show slight yellowing over time. This phenomenon is natural and depends on several factors, including UV exposure, the resin formulation, and usage conditions.

High-quality epoxy systems, however, incorporate anti-UV additives that significantly slow down this yellowing, especially for indoor applications or those with limited sun exposure.

For optimal protection and improved long-term durability, it is recommended to apply a high-UV-resistance finishing varnish, such as SR TOP CLEAR 1054 from Sicomin. This transparent system provides excellent UV protection while preserving the aesthetics and transparency of resin parts. It is also formulated without CMR components, helping to improve user safety and comfort.

Yes, standard STRATPOXY is perfectly suitable for beginners. STRATPOXY PLUS requires more precision but remains accessible to a careful individual.

Wood, sanded metal, fiberglass, carbon fiber, sanded PVC and ABS. It does not adhere properly to silicone, Teflon, or greasy plastics.

Pour commencer, il est conseillé d’avoir un kit de base : gobelets, bâtonnets, gants, balance et outils d’application, ainsi que des vêtements couvrant les parties de votre corps.

Cela permet de réaliser ses premiers projets dans de bonnes conditions.

Un bon équipement facilite l’apprentissage.

As you’ve probably realized, thanks to its many advantages, epoxy resin offers countless creative possibilities! How do you use it? What can you make with it? Follow the guide to learn everything about this resin!

How to use epoxy resin

Choosing the right hardener (based on its reactivity) is essential, depending on the work you need to do. For each product category, you will find the ratios to follow according to your application (for example, 100 grams of resin to 60 grams of hardener). These quantity guidelines may vary from one product reference to another. Depending on your projects, you may also need colorants. Once you have your products, before working with the resin, it is essential to equip yourself with gloves, a mask, and safety glasses for protection.

The mixture must then be measured as precisely as possible using an electronic scale or Sicomin measuring cups. The two components must be mixed for at least 2 to 3 minutes to ensure a homogeneous blend.

For an aesthetic result, the resin must be as transparent as possible. To achieve this, make sure to work in a dry environment, as humidity affects the transparency of epoxy resin.

To ensure a beautiful finish, you can apply a varnish to enhance the resin’s shine. Two to three coats may be necessary for a glossy and durable result, or alternatively a single coat of Top Clear.

Good to know: if bubbles appear on the surface of your resin, you can pass a heat source (a flame or a heat gun) over it to make them burst and restore a smooth, level surface.

Epoxy resin: what can it be used for?

Now that epoxy resin holds no more secrets for you, it’s time to let your imagination run free! Lacking inspiration? Here are a few ideas.

• Using epoxy resin for floor coatings.
  As mentioned earlier, epoxy resin is naturally insulating. It therefore makes an excellent floor coating: easy to maintain, durable, and aesthetically pleasing. Moreover, thanks to endless color possibilities, you can give it a fully customized look.

• Using epoxy resin to make jewelry.
  Do you have an artistic soul and a passion for fashion? You’ll love making your own jewelry! Easily moldable and highly customizable, epoxy resin gives you the opportunity to create truly unique pieces.

• Using epoxy resin to make furniture.
  Resin furniture is becoming increasingly trendy and often featured on the front pages of interior design magazines. Whether entirely made of resin or simply incorporating it, your furniture will definitely stand out and impress your guests.

The bio-based carbon content of our raw materials is certified. In addition, our finished products are analyzed using carbon-14 dating to determine the proportion of bio-based carbon they contain. These measurements are carried out by an independent third-party laboratory.